Modifications
Earlier this month, I wrote about my Pippin Atmark PA-82001-S Monitoring Unit. Initially, I didn’t plan to do any modifications to this special Pippin model. But then Keith Kaisershot told me that it is possible to feed a long SCSI cable over the metal lips of the case without doing any permanent modification. He also asked me to verify the checksum of the ROM. In this article, I will add external SCSI to my Pippin and also dump the ROM.
My Philips CDI605T/20 needed repairs before I can fully use it. Some of them was mandatory for operation (Timekeeper), some of them to make it easier on the ears (fan, optical disc drive tray). I already had experience with a Mini MMC chassis on the very similar consumer player CDI220/00 and knew what awaited me inside (its service manual helped a bit). It is actually possible to perform these repairs without taking the entire case apart (see shortcuts). I took special precautions and made photos of each and every step to be able to put everything back together in the end.
I began with removing the case and the bezels of the extension cards on the rear. Make sure to slide out the lower card first, otherwise its metal plate will grind on the solder side of the upper card.
Quizard was a series of quiz games published by TAB-Austria in the ’90s. What makes it special is the fact that it is one of the very few arcade games based on Philips CD-i hardware. The protection of Quizard 1.x and 2.x has been figured out quite a while ago and since then it is emulated in MAME. Quizard 3.x and 4.x, however, refused to run – until now. A first step was done when Team Europe dumped a protection MCU a couple of years ago. Very soon, they will release an MCU board that will turn almost every CD-i player into a Quizard arcade machine. I received a sample last week and just finished assembling and testing it.
Continue reading TAB Quizard on Philips CD-iThis has just arrived: A flash cart (multi-cart) by TeamEurope. I’ve been involved in the development in the very beginning and am very excited that it has finally has become reality. This is the kit that I’ve received upon special request:
After I had my first MVS at home, it didn’t take long until more arcade hardware followed. For example this CPS2. It looks shabby and needs some work, but it already has a Darksoft CPS2 Multi Kit installed.
The times are over, when I had to hunt down and modify Sega Pico game cartridges that had been assembled in Mexico. This has just arrived from TeamEurope: Parts to build a real Sega Pico flash cart and more.
Two more modifications for my Super SD System 3 v2, to bring it onto the same level as the new revision B.
First things first, there was also a new firmware released that fixes the reversed audio channels: 1.02 R05
Last year I began to disassemble and repair one of my Philips CDI350 players. This has been covered in the article Philips CDI350 Repair Part 1.
After that, it took me a while to make a list of all capacitors, to find replacement parts (the original Philips part numbers are not useful anymore) and to find shops that had them on stock.
The scanned CDI350 service manual on ICDIA is missing the pages 78 and 79, which contain the parts lists of the servo and power sections. I found some of the missing parts in the CDI360 service manual and some by comparing the removed parts with both service manuals.
Two portable Philips CD-i players (CDI350) came into my care last month. They show common errors, such as not loading any CDs and not storing any settings, and also flickering screens. Let’s have a look inside and repair them.
The screen becomes normal after a while so that I can navigate.
What if your favourite CD-i game refuses to start or shows some weird behaviour? Most likely, this is to blame on a defective Timekeeper and/or laser. This topic has been covered years ago. There is another problem with the game The 7th Guest, which is completely unrelated to the problems mentioned above though.
Earth Command isn’t my favourite game. It makes some fun for a while, to tamper with the various settings and eventually watch the world burn, but it never got me hooked for a long time.
Then the reports of some people caught my attention. Some had trouble starting the game, as the screen just turned black after the intro, while others had no problems with the game at all. There was no common denominator to pin down the problem, as all the CD-i players they’ve used were of different revisions and generations.
