Philips CDI350 Repair Part 3

It’s been a while since I opened my first Philips CDI350 portable CD-i player and published a repair guide with capacitor list. I have already received some positive feedback that this was helpful for others fixing their players. However, part 2 of the article ended with a big question mark because some topics remained unsolved. Let’s have a look at the status of these topics and see if I can resolve them today in Philips CDI350 Repair Part 3.

1. S-Video output is not working

This turned out to be my fault. After carefully following the traces to and from the video encoder and comparing every component with the service manual, I noticed that I had soldered two electrolytic capacitors with the wrong polarity: C938 and C991. I can only assume that this happened because I used the + marks as indicators and not the white dots. Just look at the vast amount of plusses:

Continue reading Philips CDI350 Repair Part 3

Pippin Atmark Floppy Unit PA-82002

The Bandai Pippin Atmark Floppy Unit PA-82002 is an expansion dock for the Pippin consoles that made it past the prototype stage. It was released on the Japanese market together with the Pippin Atmark in 1996. It is still incredible rare and it took me while to get a hold of one of these units. The functionality is the same that the replica floppy adapter provides and the main reason why I bought it is really the casing. The floppy adapter setup was too unpractical and fragile and I was looking for something sturdier that could stay attached to the console at all times.

This article is mainly about photos and taking it apart. There will be a small section with explanations at the end.

Continue reading Pippin Atmark Floppy Unit PA-82002